How to process and install anti-static glass fiber board?

Anti-static glass fiber board is an anti-static material formed on the basis of ordinary glass fiber reinforced composite material, covered with conductive carbon or metal coating on the surface, covered with impedance modulation resin under conductive carbon or metal coating. Anti-static glass fiber board has conductive properties, can effectively eliminate static electricity, reduce the risk of fire, is widely used in electronic industry, chemical enterprises, aerospace, national defense science and technology and other fields. The manufacturer of anti-static glass fiber board will introduce the processing and installation of anti-static glass fiber board.

First, the processing of anti-static glass fiber board

Step 1 Cut

When cutting anti-static glass fiber board, you need to use a professional glass fiber board cutting machine or CNC machine tool to cut. A few points should be noted when cutting:

(1) Cutting tool: use carbide cutter head or tungsten steel cutter head.

(2) Tool speed: speed should not be too fast, so as not to increase the temperature of the incision, causing the resin to melt.

(3) Cutting power: Cutting power needs to be adjusted according to factors such as material density and thickness to ensure smooth and non-burring incision.

(4) Cutting Angle: The incision Angle should be kept within a certain range, generally about 45 degrees.

Step 2 Drill holes

Drilling also needs to be carried out with professional machines, using the right tools and the right speed to drill.

Step 3: Polish

In order to ensure the surface quality of the glass fiber board, it is necessary to carry out polishing treatment. The following points should be noted when polishing:

(1) Grinding head: Use high-quality grinding wheel or abrasive belt for polishing.

(2) Speed: speed should not be too fast, so as not to cause scratches or cracks caused by overheating.

(3) Protection: Protective gloves, masks and other protective facilities should be worn during the grinding process to avoid splashes and injuries.

Second, installation of anti-static glass fiber board

1. Basic treatment

Before installing the anti-static glass fiber board, it is necessary to treat the foundation, such as cleaning the foundation surface, dust removal, and painting the primer. Ensure that the foundation is smooth, firm, no wear, no cracks, etc.

2. Installation method

The installation of anti-static glass fiber board generally has the following ways:

(1) Gluing method: Brush the back of the glass fiber board with special glue, place it on the foundation, compacted and fixed.

(2) Bolt method: First drill holes in the foundation, and fix the glass fiber board on the foundation through bolts or expansion bolts. This method is used when the base volume is large.

(3) Keel method: The glass fiber plate is fixed on the keel and fixed on the foundation through the keel. This method is generally used for suspended ceilings and other occasions.

3. Splicing of anti-static glass fiber board

When splicing glass fiber board, the following points need to be noted:

(1) Splicing method: glue method or bolt method is used for splicing, and different methods are used for different splicing positions.

(2) Splicing Angle: The splicing Angle should be controlled within a certain range, generally about 45 degrees.

(3) Splicing position: The splicing position should be selected in an appropriate position to avoid affecting the overall beauty and functionality of the glass fiber board.

Summary: Anti-static glass fiber board is widely used in industrial and civil buildings, and its processing and installation need to be carried out in accordance with standards to ensure the quality and safety of products. In the processing and installation, it is necessary to follow the basic treatment, installation mode, anti-static glass fiber plate splicing and other specifications.